DTF Series Drilling Pump

Home>Products>Drilling Equipment>DTF Series Drilling Pump

Parameters

Model DTF-1600
Model Horizontal Triplex Single-acting Plunger Pump
Input Power(Kw) 1180
Rated Stroke Speed(Stroke/Min) 120
Stroke Length(mm) 304.8
Type of Gear Herringbone Gear
Gear Ratio 4.206:1
Overhanging Part of Pinion Shaft φ215.9×337
Connecting Dimension of Suction Inlet 305mm
Connecting Dimension of Discharge Outlet 5 1/8 "Flange
5000#API
Dimension of Valve Chest (mm) API 7#
Overall Dimension(Length*Width*Height)(Excluding Discharge Filter Assembly and Bent Pipe)(mm) 4426×2413×2004
Weight 26006


Stroke/Min Rated power φ180 φ170 φ160 φ150 (φ140)
KW HP 23.4 239 25.8 263 28.8 293 32.7 333 34.3 350
L/S m³/h L/S m³/h L/S m³/h L/S m³/h L/S m³/h
130 1275 1734 55.4 181.5 44.97 161.89 39.83 143.39 35.01 126.04 30.5 109.8
120* 1176 1600 46.54 167.54 41.51 149.43 36.77 132.37 32.32 116.35 28.15 101.34
110 1078 1467 42.64 153.5 38.05 138.6 33.71 121.36 29.62 106.63 25.81 92.92
100 980 1333 38.78 139.61 34.59 124.52 30.64 110.31 26.93 96.95 23.46 84.46
90 882 1200 34.9 125.64 31.13 112.07 27.58 99.29 24.24 87.26 21.11 76
1     0.3878 1.3961 0.3459 1.2452 0.3064 1.1035 0.2693 0.9695 0.2346 0.8446
Notice:
1.Calculating are based on 90% mechanical efficiency and 100% volumetric efficiency
2.Is the input power of recommended. frequency of stroke and constant operating.
3.φ140 liner is not recommended.